option (dhcpv4-server-policy-config)

Configures raw DHCP options. The DHCP option has to be configured in the DHCP server policy. The options configured in the DHCP pool/DHCP server policy can also be used in static bindings.

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

option <OPTION-NAME> <0-250> [ascii|hexstring|ip]

Parameters

option <OPTION-NAME> <0-250> [ascii|hexstring|ip]


<OPTION-NAME>	Configures the option name
<0-250>	Configures the DHCP option code from 0 - 250
ascii	Configures the DHCP option as an ASCII string
hexstring	Configures the DHCP option as a hexadecimal string
ip	Configures the DHCP option as an IP address

Usage Guidelines

Defines non-standard DHCP option codes (0-254)

Note

An option name in ASCII format accepts a backslash (\) as an input, but is not displayed in the output. Use the show running-config command to view the output. Use a double backslash to represent a single backslash.

Examples

nx9500-6C8809(config-dhcp-policy-test)#option option1 200 ascii

nx9500-6C8809(config-dhcp-policy-test)#show context
dhcp-server-policy test
 option option1 200 ascii
nx9500-6C8809(config-dhcp-policy-test)#

Related Commands


no (dhcpv4-server-policy-config)	Removes DHCP server options